Published On: Mon, Apr 4th, 2022

Garage Door Maintenance Tips

One way to ensure that your garage door is in good working order is to visually inspect all of the components regularly. This includes checking the springs, cables, rollers, pulleys, and tracks for any signs of wear or damage. Remember, regular maintenance is key to the longevity of your garage door. Find Your Perfect Garage Door and keep it operating smoothly for years to come.

You should also make sure that the door opener itself is working properly (get more info about it here). If you notice any problems with any of the components, it is important to have them repaired or replaced as soon as possible to avoid further damage. Regular maintenance and inspection of your garage door will help to prolong its lifespan and keep it operating smoothly.

Instead of spending money on a garage door repair, try these simple garage door maintenance tips:

Inspect the Garage Door System Visually

The most straightforward technique to determine if your garage door is having difficulties is to look for signs of damage. However, if you’re not sure what to search for, it might be a little difficult.

To assist you, here are some of the most common garage door component problems that you may check:

  • Check the springs regularly. If you notice any rust or wear on the springs, it’s time to replace them. Worn out springs can also cause the door to open or close unevenly. If you have a garage door opener, springs can also cause the opener to strain, which can shorten its lifespan. Springs are typically under a great deal of tension, which makes them extremely hazardous. It is preferable to hire a professional garage door spring repair from an expert rather than attempting it yourself.
  • Rollers: Both tracks and rollers must be in motion. The track’s moving parts are called rollers, as well as the rotary shaft that runs through them.
  • Cables: The wires must be tight and secure. Remove any fraying or broken wires immediately to avoid future damage.
  • Tracks. Take out any rust, stains, or damage. If the tracks are rusted, stained, or damaged, clean them using a gentle formula of mild dish detergent with warm water. Check for mud and other debris and remove it if necessary.
  • Bearings. Look for indications of wear and tear, damages, or bending in the bearings.
  • Weather seal. External indicators of deterioration or damage in the weather seal might be found and they require replacement.
  • Cable drums. Be sure to inspect the cable drums carefully. Check for cracks or deformation in the drums.
  • Garage door panel. Garage door panels are made of steel, aluminum, or plastic. Steel/aluminum garage doors may be dented and termite damage to wooden garage doors can occur.

If you find that one of these parts on your garage door is broken or not working properly, you can always go to an online business directory, find a garage door company near you and let a professional take care of the repair or replacement. 

Test the garage door parts

Visual inspection of the garage door system may occasionally overlook a garage door problem. As a result, testing of the garage door components is another aspect of garage door maintenance that must be performed.

 Here are some garage door maintenance checks you may do:

  •  Garage door balance 

To check if your garage door is properly balanced, press the open and close buttons on the remote control of your garage door opener. If the door moves strangely, there is an issue with the springs, cables, rollers, tracks, or opener.

  • Garage door opener remote program 

Program the Automatic Door Opener‘s remote device before using it. After programming, check to see if the remote device’s button controls the garage door properly.

  • Limit Switch Settings

Limit switches on the garage door opener limit how far a garage door can open or close. If you make a mistake with them, your garage door will not fully open or close. As a result, you should adjust the limit switches as needed to ensure that your garage door performs at its best.

  • Auto-reverse mechanism 

Garage doors with automatic openers have safety sensors that activate the automated opener’s auto-reverse mechanism. As a result, if you put something underneath the garage door that prevents it from closing, it should reverse its progress.

Maintain your equipment to prevent future problems.

Inspecting and testing for a garage door problem are two of the most common methods. However, you may prevent a garage door issue by performing these garage door maintenance duties:

  • Tighten up loose hardware. Screws and bolts can work themselves loose over time, so make sure to use only the best screws and bolts like Stainless Steel Carriage Bolts. Check all of the hardware on your garage door regularly and tighten anything that is loose. Garage door components, such as brackets, hinges, and the opener’s drive mechanism, may become loose over time due to vibration. 
  • Inspect the tracks for damage. The tracks that the garage door rolls on can become bent or damaged over time. If you see any damage, use a hammer to gently straighten them back into place.
  • Clean the sensors. The sensors that tell the garage door when something is in the way can get dirty and stop working properly. Clean them with a cloth or brush regularly to keep them working correctly.
  • Apply Finishing Treatment. It’s unavoidable for your garage door to get scrapes and dents. As a result, if the paint on the garage door panels has worn away, you may refinish them. Furthermore, you may use a gloss or matte finish to your wooden garage door to reduce termite infestation.
  • Apply silicone- or lithium-based lubricant. Every six months, the moving components and hinges in the garage door system require silicone- or lithium-based lubrication. It will reduce friction and ensure a smoother garage door movement. If you don’t know how to lubricate garage door components, consult the owner’s manual or contact a professional.

Conclusion

Garage door maintenance is an important component of ensuring that your garage door lasts a long time. It can help you avoid the expense of garage door repair or replacement. Hopefully, you will be able to apply the suggestions in this article to keep your garage door from harm. 

A well-maintained garage door with a beautiful design can actually improve the curb appeal and value of your house. So don’t wait any longer to do your garage door a proper maintenance. It’s also crucial to note that the safety of your home is essential, therefore you may want to contact a skilled and professional Locksmith service if you wish to maintain the security of your property.

Do not attempt to repair your garage door yourself. Give us your information, and we’ll contact you straight away.

About the Author

Discover more from The Boca Raton Tribune

Subscribe now to keep reading and get access to the full archive.

Continue reading